Tips for Rust-Free Garden Tools RSS

I have noticed something interesting about the Gardeners in London that I come across, and that is the super condition of their tools in general. No doubt they do a better job with them that way, Find a Gardener on Mr-Skilland of course they also have to replace them less frequently. I have to admit though that mine used to be a total disaster, but only before I discovered these useful tips.

You will need a bucket with a lid, enough sand to almost fill it, new or used engine / cooking oil, and a few old rags. The bucket lid is to keep out the dust and dirt, so almost anything will do.

• Make a habit of keeping the bucket in a dry corner of the garden shed or garage

• Fill the bucket with the sand except for the last four inches. This helps keep it stable while sprucing up your tools. I agree that this can make it heavy, but at least your wallet won’t be lightened by the cost of Gardening Quotes after your tools all rust away.

Find a Gardener on Mr-SkillTop up the bucket with the oil, and watch it as the sand absorbs it. If you spilled some, well… that’s a further use for the old rags…

• Take each garden tool in turn and shove the working edge in and out of the sand until it is cleaned. Four or five repetitions should do the trick.

• Wipe the tools with the rags as you go along, remembering to leave a thin film of oil behind.

How’s that for something different from us? Should you need to Find a Gardener on Mr-Skill (which is easier than you think), you could leave your tools out in the garden for them to admire while working (but not to borrow, naturally). It’s a funny old world isn’t it. The cleverest ideas are often the simplest too.



Comments are closed.