Subscribe to our RSS Feed
Sometimes we come across customers trying to crack walnuts with large sledgehammers. By this, we mean people trying to turn a rowing boat into an ocean liner. Take simple brick paving jobs, for example. If it’s not a heavy traffic area you could even do the job yourself, thereby avoiding the 
need for a London Bricklayer or other specialist.
- Obtain a supply of decent quality bricks. By this we mean a product that’s well baked through, reasonably rectangular, and of a pleasing appearance too. Don’t be put off if the colour varies though. In fact, variety can be a large part of the charm.
- Mark out the path or patio and excavate to twice the thickness of the bricks laid flat. Remove any roots you find. Lay a plastic sheet in the hole to discourage weeds. Mix dry cement powder with two-thirds of the soil dug out, in proportions of four parts earth to one part cement. DO NOT MOISTEN this mixture. Mother Nature will do it for you.
- Compact this mixture back into the hole until it is level, and one brick’s height below the ground. Sprinkle fine dry sand evenly over it to about half an inch thick. Lay the bricks in whatever pattern
you prefer, tapping these down firmly with a rubber mallet, and adding / removing sand as necessary to create a level effect.
- Fill any gaps with brick pieces. Use a hammer and chisel NOT AN ANGLE GRINDER to cut these down to size, and remember to wear thick gloves. Finally, excavate a frame all around the paved area the width of a single brick. Mix all the remaining earth with dry cement powder – in a ratio of three parts to one this time – and tamp it back in. The mixture will harden naturally over time. Cut away any surplus plastic sheet.
How that for service from Mr-Skill? There’s no need to ask us for Bricklaying Quotes if you’d like to do a job like this yourself. Should you decide that you’ve got better things to do though, we can help you Find a Bricklayer working in your area, and We Won’t Charge you a Penny for this service either.