Subscribe to our RSS Feed
Brick steps are lovely to behold, but they do tend to get a little grimy over time, as dirt collects and moss develops. I popped over to the local brickfield the other day, and picked up some tips I’ll gladly share with you here. 
This is definitely not a job to take lightly though. In fact I’m inclined to suggest you Find a Bricklayer to do the job for you instead
- Remove any obvious blobs of cement or anything else using a metal or hard-wood scraper. The same goes for any paint runs too.
- Obtain a supply of hydrochloric acid from a hardware store. Dilute 1-part of acid to 20-parts of water for light-coloured bricks, and twice the strength for darker ones. Do not make the mixture any stronger, or you could harm your health!
- Protect yourself and the adjacent areas from splashing, and saturate the area where you will be working with clean water. Minimum safety requirements are rubber gloves and safety glasses.
Apply the hydrochloric acid dilution to a small area highest up the wall. Wait for between 3 and 6 minutes, and then scrub it down thoroughly. Work in small batches of no more than one square meter at a time, and rinse thoroughly as you go along.
- HINT For best results, London Bricklayers recommend rinsing light-coloured bricks with a bicarbonate or washing soda solution instead.
A messy job indeed, and one I’m not sure I’d care to tackle myself. In fact I can think of a dozen things I’d prefer to do. I reckon that’s where Mr-Skill comes in. You can get a Bricklayer Quote to do the job for you, just by clicking on the link. And there’s no charge at all for this superb quoting service either!