I never cease to be amazed at the variety of bathroom accessories available at hardware stores across the UK these days. Every one of these has at least one fixing hole – if I got that contract I doubt I’d ever look back. Many folk are nervous about drilling through ceramic tiles though, because the
consequences of cracking one can be quite expensive.
And so they try alternatives like two-sided tape and contact glue. Unfortunately these never work properly because ceramic tiles are highly glazed. Worse still, the accessories come loose, and chip even more expensive fittings when they come crashing down. If you are handy you don’t need to Find a Bathroom Fitter – you just need the right tools and your brain switched on.
• When working above a drainage point like a washbasin or a toilet, insert the plug or lower the seat. Lay down a dust-sheet to make cleaning up afterwards easier too.
HINT – Ceramic tile and masonry dust can permanently stain moist grout, so make sure your work area is dry.
• Gently tap the tile where you intend to drill the hole with something metallic that’s also light. If you hear a hollow sound there’s airspace between the glue. London Bathroom
Fitting Firms train their staff to look for another fixing point when they find this, because tiles break easily over hollows.
• Make a clear mark on the tile where the hole must go with a laundry marker. Make a cross over it with transparent tape that does not have a shiny finish. Tap the tape gently and repeatedly with a new centre punch, until you have scored the ceramic finish beneath it.
• Drill through the hole using a specialist drill bit and an electric drill set off-hammer. Once you are through the glaze you can drill into the tile and wall more quickly. Tidy up the mess, wipe things clean, and you’re good to go!
Mr-Skill is a virtual market place where customers and skilled tradespeople meet. It’s free to the general public, and bids can be up to 30% below general market rates. Click on this link – get Cheap Bathroom Fitting Quotes for your postcode right now!
