Subscribe to our RSS Feed
There’s nothing quite as sad as a worktop with a corner broken off, or burned by a hot saucepan or an electric iron. Fear not. A replacement is not as expensive as you think, even when done by a London Kitchen Fitting Firm.
• 
Obtain a replacement piece that’s cut to size, and edged-off at any exposed end / ends. In that case, remember to allow an overhang that matches the other worktops as closely as possible.
• Clear the old worktop of everything. Remove the cabinet doors and clear the units completely. Carefully inspect for stains or water damage, because this is the best chance you’ll have to do repairs for some time.
• Remove the seal between the worktop and the tiles, and rout out any grout taking care not to chip or crack the tiles. Take your time – this is where you make a professional difference. If the gap is tight, you might need to Find a Kitchen Fitter to assist.
• Remove the screws that attach the worktop to the cabinetry from underneath, making sure you find them all. Double-check that the top is clear of all the tiles, and then gently work it loose. You must work evenly and gently to avoid any contact with the tile edges.
• 
When completely free, remove the old worktop from the kitchen. Vacuum up all the dust. Wipe the surfaces clean and have a cup of tea. You’re past the halfway point!
• Lay the new top roughly in position, and gently move it into the space between the cabinetry and tiles. Attach it to the cabinetry from underneath, using the old holes and similar screws. Grout in the gap, and when this is dry add a bead of silicone. Now you can re-fit the doors and get on with your life. What a pleasure – damage controlled.
This information is provided with the compliments of Mr-Skill, although we recommend that only experienced people attempt this project. Should you decide to obtain Kitchen Fitter Quotes instead, we assure you of our best service, and top value in the industry too!