| |
Posts Tagged ‘damage<’
Posted in Plastering & Drywall on Feb 01
Damp is an on-going problem in many homes in Britain, and that’s not just in the older ones either. Water, especially when forced by wind can find its way inside an outside wall through the tiniest of cracks. After the leak is fixed, it’s time to Find a Plasterer to fix the evidence that alerted us to the damp in the first place.
The Problem
The water has leached the cement away leaving weakened plaster that will eventually come off. The only solution is to hack it out and replace it. You have a choice, though. You could Ask Mr-Skill to Arrange a Plaster Quote, or you could have a go at it yourself.
 Repair Stage One
You have to get rid of the damaged plaster at least a foot above any visible damage or residual salts. If the damp was low down, then you must in any case remove the plaster to three feet above floor level. Brush away every grain of loose material. Complete the job with a vacuum cleaner – you may wish to do this when the wife is out shopping.
Repair Stage Two
This is a tip a London Plasterer taught me years ago. Put on a pair of disposable latex gloves. Make a slurry of cement powder and water with a cup of bonding liquid added – the final consistency should be like runny porridge. Brush this firmly over the space where the old plaster came out. This will allow the new plaster to adhere properly. Wash your hands and tools immediately. Allow the slurry to dry for a day.
Repair Stage Three
Make up a stiff plaster mix of 3-Parts sand to 1-Part cement. Apply this with a wide paint scraper or steel float across the entire surface roughly, and leave it alone for two hours to set. Apply a fresh mix of plaster that stands just proud of the surface. Work this off with a straight edge later the same day.  Leave the job to cure for a week.
Repair Stage Four
Apply a moist mix of Polyfilla over the entire surface. When it’s totally dry and the surface has gone a little powdery, finish the job off with an a sanding block or orbital sander, using medium-grit paper. After that, you are ready to decorate!
That’s all very well in theory, but do you really have the time to spend on this? If not, that’s where Mr-Skill comes in. We provide a matching service between customers and tradespeople. Unlike some others, we don’t add a penny to the cost of jobs.
Tags: adhere, bond, brush, cement, clean, consistency, crack, cure, damage, damp, dry, dust, exterior, find a plasterer, float, get rid of, glove, grit, hack, london plasterer, mix, orbital, outside, paint scraper, plaster, plaster quote, polyfilla, powder, remove, replace, salt, sand, scraper, set, slurry, stick, straight edge, tip, wall, water
Posted in Plastering & Drywall | Comments Off
Posted in Plastering & Drywall on Jan 26
From time to time we find jobs posted in the wrong category on Mr-Skill. When this happens, we duplicate the listings in more appropriate categories. Plasterers are a case in point because decorators  attend to damaged plasterwork. We decided to clear up the confusion, and make it simpler to Find a Plasterer here.
The main job of plasterers is to mix, and then apply various types of plaster on internal walls and ceilings. From time to time they also coat outside walls with sand / cement render, pebble-dash, and stone-effects. Notice that plasterers do their work in bulk, and that there’s little point in asking for a Plastering Quote where it’s just a small repair.
Within these broad brush strokes, plasterers generally work in one of the following three sub-disciplines:
- Solid Plastering – Applying wet finishes to interior walls and ceilings, and sometimes pebble-dashed effects on outside walls
 Fibrous Plastering – Creating ornamental cornices and ceiling roses using special plaster reinforced with fibre
- Dry Lining – Installing interior drywalls on frames, for others to decorate later.
Larger firms, especially Plasterers in London may take on all three kinds of work.
Plasterers earn their wings in two different ways. Some learn by watching others and develop skills suited for straightforward jobs. The better ones hold qualifications like the City & Guilds (6217) Certificate in Basic Construction Skills (Plastering). It’s important to understand the difference in qualifications when assessing the quality of Plastering Quotes. This information is provided by Mr-Skill.
Tags: apply, ceiling, City and Guilds, cornice, damage, decorator, dry, dry lining, dry wall, drywall, exterior, fibrous, find a plasterer, interior, internal, mix, outside, painter, pebble dash, plaster, plasterer, plasterers in london, plastering quote, plasterwork, rose, solid, wall, wet
Posted in Plastering & Drywall | Comments Off
Posted in Locksmith on Jan 06
There’s nothing quite as irritating as losing keys, or battling with sticking locks without a plan to bail you out. In fact, at times like this you sometimes feel like hitting your head in frustration against a wall. If in the City, you’ll need to  Find a London Locksmith to bail you out, and that could cost you a pretty penny too. This might all have been avoidable, if you had followed these simple tips:
- Have your outside locks serviced regularly. You can Obtain a Locksmith Quote by clicking on the link. There’s no charge for this service, and the rates you receive will be highly competitive too.
- Inspect your keys regularly for signs of damage. A bent key is brittle, and could suddenly snap in two pieces. A worn one could eventually fail to work, just when you need it most
- Make up a spare set of keys. Click on this link to Find a Locksmith in your immediate area. Once you have a spare set, entrust them to a neighbour or some other trustworthy person.
 TIP – Never leave your spare keys hidden on your property or in your car. Trust me, crooks know every place that you could think of, and you can even find these listed on the internet. Act wisely in this regard.
Mr-Skill is a tradesperson-listing service that is freely available to members of the general public, and provides a Bulletin Board where you can post your jobs. And that includes far more than just having keys cut too.
In fact, we provide Links to Every Trade Available, and deliver our service FREE.
Tags: bent, brittle, broken, competitive, damage, fail, find a locksmith, frustration, inspect, key, lock, locksmith quote, london locksmith, plan, rate, service, snap, spare, spare key, spare set, sticking, tip, trust, worn
Posted in Locksmith | Comments Off
More UK residents are adding the WOW-Factor to their homes every year, by replacing unsightly French Doors with Bi-Folding Doors in PVCu,  Timber or Aluminium. That’s because not only do they open all the way in glorious summer. They’re also among the snuggest fits available in winter too. And this gives you the best of both worlds when you need them.
While most people prefer to Find a Door Fitter on Mr-Skill to fit Bi-Folds to existing openings, the brave could possibly install these by themselves. If contemplating this yourself, please do offset the risks of inadvertent damage against the savings on the labour. The following are criteria you may like to consider when specifying Door Fitting Quotes instead
- Standard Sizes – If your opening is slightly oversized, consider lining it with appropriate material to take up the gap, and pre-empt requiring an expensive special order
 Slim Sightlines – How much clear vision will the frame sacrifice? You need to get as close to unobstructed as possible, albeit within constraints
- Thresholds – Do you require low-maintenance flush-fitted thresholds, or those recessed for outdoor weatherproofing?
- Locking – What level of security is wise? Locks are not all that expensive. Think ahead here – it could be time for an upgrade
The secret to a successfully trouble-free Bi-Fold Door installation – as any London Window Fitter knows – is a completely square and plumb installation. We cannot over-emphasise the need for this. If in any doubt at all of your ability to achieve this, why not rather seek Expert Advice instead? We’ll introduce you to a skilled and rated tradesperson, absolutely free to you.
Tags: aluminium, bi-fold, bi-folding, bifold, bifolding, clear, close, damage, door, door fitting quote, find a door filler, flush, gap, line, lining, lock, london window fitter, open, opening, outdoor, over-size, oversize, plumb, pvcu, saving, security, snug, square, threshold, timber, uPVC, vision, wide, window, wood
Posted in Window & Door Fitting | Comments Off
While replacing glass in a UPVC door (or window) is something professionals usually do, there may be times when you have to do the job yourself – like over the Christmas break.  You could do the job yourself provided you can lay your hands on a suitable pane of glass, but do wear gloves and work carefully. At other times it makes far more sense to Find a Window Fitter on Mr-Skill.
- Examine the door frame around the damaged glass to determine from which side it was fitted. One side will have an unbroken line over a strip of rubber. On the other side there will be four pieces of beading that clip in to hold the glass.
- Take up a sharp putty knife or paint scraper and work it under a bottom or a side piece of bead. Hold your other hand out of the way in case the tool slips. Carefully prise out the bottom and side beads, except the top one which will still be holding the glass in place.
 Have an assistant hold the glass in the door frame while you take out the top bead. Hold the pane on both sides while you gently lower it out. Be careful! Wear gloves. The edges will be razor sharp!
- Install the replacement pane in the reverse order, taking care not to crack the glass by applying too much pressure. London Window Fitters often use the trick of applying a little dishwashing soap to the recess in the window frame, when pressing in the final bead.
Under normal circumstances we would recommend that you get Window Fitting Quotes instead and perhaps on Mr-Skill too. That’s because you run the risk of injuring yourself, if for no other reason than that the job may be a little bit unfamiliar to you.
Tags: bead, beading, bottom, broken, clip, crack, damage, dishwash, door, find a window fitter, fit, frame, glass, harm, injure, install, knife, london window fitter, pane, pressure, prise, quadrant, replace, rubber, scraper, sheet, side, soap, strip, top, uPVC, window, window fitting quote(s)
Posted in Window & Door Fitting | Comments Off
Posted in Locksmith on Nov 07
There’s nothing quite as unnerving as arriving home from holiday, and finding you’ve either lost your key or the front door lock refuses to budge. This unfortunately boils down to a lack of care or just stupidity. I can say that, because I’ve been guilty of these oversights myself when I was younger.
 Lost Keys – The solution is as simple as people’s failure follow it is incredulous. Leave a spare set of keys with a good friend you trust, so they can visit your home from time to time too. That way, you may never need to Find a Locksmith at such an inconvenient hour.
Jammed Locks – It’s a funny old thing, isn’t it? We update our ant-virus databases and we even sometimes mow our garden lawns. Yet we leave our essential door and window locks to take care of themselves completely, when all you need to do is the following:
• Lubricate all your exterior door locks with a puff of graphite powder (not oil because that will attract the dirt and dust). Lock and unlock them several times to work the lubricant in. If the lock is exposed to the elements and seldom used, consider taping over the outside keyhole with a piece of weatherproof tape to keep the moisture out.
•  The advice of every London Locksmith and all others lock repairers too is to take action as soon as a lock starts giving trouble. If you can open the door or window you could change the lock yourself. At the least you could possibly avoid paying overtime rates.
• Inspect your keys monthly for signs of damage, and never, ever use worn ones. That’s because a broken piece of key can be impossible to remove, necessitating an expensive repair.
Whatever else you do please do not overlook the need to maintain your locks. Did we mention you can get Locksmith Quotes on Mr-Skill too? You’ll find the rates more than competitive and our service exemplary. Isn’t that good to know. Remember that in times of trouble we’re here for you.
Tags: break, broken, budge, care, change, damage, door, element, find a locksmith, friend, graphite, inspect, jam, key, lock, locksmith quotes, london locksmith, lose, lost, lubricate, maintain, moisture, oil, powder, rate, remove, replace, solution, spare, stuck, tape, weather, window, work
Posted in Locksmith | Comments Off
Posted in Kitchen Fitting on Nov 02
There’s nothing quite as sad as a worktop with a corner broken off, or burned by a hot saucepan or an electric iron. Fear not. A replacement is not as expensive as you think, even when done by a London Kitchen Fitting Firm.
•  Obtain a replacement piece that’s cut to size, and edged-off at any exposed end / ends. In that case, remember to allow an overhang that matches the other worktops as closely as possible.
• Clear the old worktop of everything. Remove the cabinet doors and clear the units completely. Carefully inspect for stains or water damage, because this is the best chance you’ll have to do repairs for some time.
• Remove the seal between the worktop and the tiles, and rout out any grout taking care not to chip or crack the tiles. Take your time – this is where you make a professional difference. If the gap is tight, you might need to Find a Kitchen Fitter to assist.
• Remove the screws that attach the worktop to the cabinetry from underneath, making sure you find them all. Double-check that the top is clear of all the tiles, and then gently work it loose. You must work evenly and gently to avoid any contact with the tile edges.
•  When completely free, remove the old worktop from the kitchen. Vacuum up all the dust. Wipe the surfaces clean and have a cup of tea. You’re past the halfway point!
• Lay the new top roughly in position, and gently move it into the space between the cabinetry and tiles. Attach it to the cabinetry from underneath, using the old holes and similar screws. Grout in the gap, and when this is dry add a bead of silicone. Now you can re-fit the doors and get on with your life. What a pleasure – damage controlled.
This information is provided with the compliments of Mr-Skill, although we recommend that only experienced people attempt this project. Should you decide to obtain Kitchen Fitter Quotes instead, we assure you of our best service, and top value in the industry too!
Tags: broken, burn, cabinet, chip, clean, counter, crack, cut, damage, door, dust, edge, end, expose, find a kitchen fitter, grout, inspect, kitchen, kitchen fitter quote, london kitchen fitting, loose, overhang, remove, repair, replacement, screw, seal, silicone, stain, tile, top, unit, vacuum, water, wipe, work, worktop
Posted in Kitchen Fitting | Comments Off
We’re all becoming a bit more green-minded these days, as energy prices soar and global warming starts to take effect. The devices that we use to heat our water are especially important, because the heat-exchange process is so energy-intensive. I’ve even heard of increasing sales in shops of de-scaling kits for electric kettles.  But how many of us spare a thought for our closed-circuit hot water systems, or consider getting Plumbing Quotes on Mr-Skill to descale them.
The root cause of the problem lies in the impurities in the water that we heat, and the damage caused by chemical contamination in different regions. In all cases there is a gradual build-up of harmful scale, as the by-products of calcium carbonate and black iron oxide begin to take effect.
The twin results of these two types of contamination are lowered thermal efficiency, and rust that corrodes the pressure tank until the system is no longer safe. This comes down to unnecessary expenditure of two kinds – higher electricity bills and eventually expensive hot water system replacements.
The same contaminated water finds its way through pipes to taps and sinks. As it does so, it gradually blocks the pipes the same way as cholesterol does to our arteries. Its final act of vengeance is when it  causes irreversible stains to expensive bathroom tiles and showers. By then of course the damage is largely done.
If you hear kettling noises in the roof space, spot scale build-up or find it necessary to turn up the boiler thermostat, then it’s definitely time to Find a London Plumbing Expert or someone nearer to advise. There are many techniques these days to repel the effects of scale, and the savings can be quite significant.
You can Find a Plumber on Mr-Skill that we’ve rated personally, and when they quote they’ll know that they’re being compared too. They’ll also know that in the unlikely case of problems you’ll be talking directly to us about them. Who said you can’t find quality anymore these days.
Tags: calcium, chemical, contamination, corrosion, cost, damage, descale, electricity, exchange, find a london plumbing expert, find a plumber, global warming, green, hot, impurity, oxide, pipe, plumbing quotes, rust, scale, shower, sink, tap, thermal, thermostat, tile, water
Posted in Plumbing, Heating & Gas | Comments Off
Climbing ivy is undoubtedly a sight to behold as spread out across a wall and creates an environment in which the birds may nest. But it has its disadvantages too. Snakes and spiders and even rats may use it to gain access to your bedroom, and it can also cause damage to bricks, window frames and gutters.  Are you of a mind to get rid of yours? Then you may need to Find a Gardener on Mr-Skill to do the work for you. That’s because standing on a ladder all day is dangerous, and the job is laborious too. Not convinced to call in help? Then here is what you need to do…
• Pull a test sample of ivy away from the wall to determine how thick it is, and whether it tears off without causing damage. If it comes away easily then you could continue. If not, then you may need to get Gardening Quotes to have poison applied by an expert, and perhaps even call in a builder afterwards to make repairs.
• Returning to ground level, lop off all the vines as close as possible to the ground before proceeding to peel away the cut branches. Be careful here, because a sheet of ivy can come loose unexpectedly, and this will be heavy and surprisingly dusty too. Do not attempt to deal with the tiny hand-like suckers yet.
•  Bag the cuttings and dispose of them at your local council dump-site according to the bylaws.
• After approximately two to three weeks, remove the suckers with a stiff wire brush covered with approximately two tablespoons of household laundry detergent. Every Gardener in London knows all too well not to miss the deadline. That’s because beyond this period the suckers oxidize, and are stubborn to remove.
So there you go. It’s not really all that difficult to get ivy off a wall. It’s just a messy, time-consuming job. Not in the mood to do it anymore? Then speak to Mr-Skill about the services of a Rated Local Gardener.
Personally, I find the patina of natural brickwork far more appealing, especially on an older building.
Tags: away, bag, bird, brick, builder, cutting, damage, danger, detergent, dispose, dust, expert, find a gardener, gardener in London, gardening quotes, ground, gutter, heavy, help, ivy, ladder, loose, lop, peel, poison, pull, rat, repair, sample, snake, sucker, tear, test, vine, window, wire brush, work
Posted in Gardening & Landscaping | Comments Off
The last components that are fitted when assembling modern baths are the front panels themselves. These clip easily into place, and clip out easily too in order to provide access to drains and pipes. Because bath sizes are standardised these days, it follows that it is equally easy to replace an existing panel on a modern bath.
 This represents a superbly simple way to add new panache and style and colour to existing bathrooms for a fraction of the cost of refits, and you don’t necessarily require Bathroom Fitting Quotes before you start. In fact, the biggest task is often selecting the right bath panel from the range of options.
We recommend that you resist the urge to install anything that is capable of absorbing water, whether this spills over the bath-rim, or is present in the form of humidity or steam. This puts paid to romantic ideas of natural wood unfortunately. Speak to any London Bathroom Fitter and you should always receive the same consistent message – stick to fibreglass or plastic, or there is no guarantee.
Fortunately these modern materials come in all kinds of finishes and colours, and being mouldable are available in different profiles too. You will have to shop around if buying directly from the manufacturers though.  Moulds are expensive meaning that each factory offers a strictly limited range.
As you shop around you are bound to be impressed by the huge variety of designs available, especially if searching on the internet. Mr-Skill’s advice is to keep things simple unless you have a farmhouse bathroom. Light colours and less intrusive designs work best in smaller spaces.
Although is possible to replace a bath panel yourself, you may prefer to Find a Bathroom Fitter on Mr-Skill instead. That’s because you could find it difficult working on your knees in cramped spaces, and you could also end up damaging the material as well. If you choose your panel wisely though, then you should inevitably be enthralled by the stunningly refreshed effect. Isn’t it nice to know that some home improvement projects are so easy?
Tags: absorb, access, bath, bathroom, bathroom fitting quotes, clip, colour, component, cost, cramp, damage, design, drain, fibreglass, find a bathroom fitter, finish, fit, guarantee, humidity, install, intrusive, light, london bathroom fitter, material, mould, option, panel, pipe, plastic, refit, replace, simple, size, spill, steam, style, variety, water, wood
Posted in Painting & Decorating | Comments Off
|
Subscribe to our RSS Feed