| |
Posts Tagged ‘fascia<’
In its simplest form a tiled roof is a dead-simple thing. You just need to make sure the ridge is intact, and the barge boards are in position. Problems can set in when architects add valleys, hips and chimneys. The situation’s even more complex when there’s a party wall involved. The intelligent homeowner will find a roofer to assess the situation every year.
Generally speaking this assessment process includes:
- Ridges – The ridge tiles cemented on top of the peak and side ridges work loose as the roof timbers settle under the weight. They perform the essential dual role of securing runs of tiles and waterproofing primary roof joints. Every London roofer knows there’s only one way to fix the problem properly, and that’s to lift off and re-cement the entire run.
- Valleys – These are sealed off to avoid problems for the life-cycle of a roof, and should remain trouble-free although the tiles along them may move out of alignment and require re-positioning. When up on a roof it’s always a good idea to apply a fresh coat of waterproofing to the lining.
- Chimney – If you have the slightest doubt that the flashing’s come away it’s essential to get a roofing quote and have it replaced right away. That’s because rainwater builds up against the upper side of the chimney, and if it finds a way through it will drip through the ceiling.
- Tiles – While these should last a lifetime too, they are brittle
 and snap easily underfoot (another excellent reason why not to trust your roof to an amateur). Ask your roofer to cast an eye around when they’re up there and advise you accordingly with a recommendation
Although Barge Boards should be firmly attached to roof timbers, they have been known to work loose during windstorms, and can endanger life and limb should they come crashing down. This is why Mr-Skill recommends an annual roof inspection, so you can sleep peacefully underneath and have absolutely no concerns. And that’s exactly what should happen when you find a tradesperson through us.
Tags: annual, barge, brittle, ceiling, cement, chimney, complex, drip, fascia, find a roofer, flashing, hip, inspect, joint, leak, line, london roofer, party wall, peak, ridge, roof, roofing quote, side, snap, tile, valley, waterproof
Posted in Roofing, Gutters & Drainage | Comments Off
Roofers lay tiles loosely over each other in an overlapping pattern, and hold them in place with edging fascias, and special tiles cemented in place along the ridges. If these ridges fail, then there is a possibility of a strong wind lifting sheets of roof tiles with disastrous results. This fairly common problem usually begins as roofs settle after the first few years, and  the rendering beneath the ridges separates.
This is not a job for an amateur with a bad head for heights. In fact, we strongly recommend that you Find a Roofer to do the following work for you instead.
• Identify which ridge tiles have worked loose. This could be just one, a few, or the entire ridge, and the solution varies accordingly. If you can remove the loose tiles without disturbing the adjacent ones then this could save you time and money, although it is unwise to take chances and end up with a patch job.
• Obtain a supply of replacement ridge tiles. Remove offending ridges, set them aside and carefully chisel the loose rendering off the roof tiles beneath. You can leave a small residue of old rendering behind, provided that this is firmly attached.
• Soak the replacement ridge tiles and the supporting roof tiles with clean water until they have taken up a slightly darker hue. This ensures that they do not suck the moisture out of the new rendering, and weaken it.
•  Loose fit a new ridge tile, make a chalk mark on either side of it, and set it aside again. Lay two generous lines of suitable tinted rendering within the chalk lines. Press the ridge tile gently into place and remove any surplus rendering with trowel and damp cloth. Repeat the process as necessary along the entire ridge, remembering to close in the ends of the last ridge tiles if you replaced these too.
• A competent London Roofer will always check carefully that there are no cracks or holes showing anywhere on the ridge. This is because a strong gust of wind can blow rainwater through a tiny hole into the roof space below with surprising force, and form damaging pools on ceilings.
Should you decide to get a Roofing Quote on Mr-Skill, then we would be delighted to put you in touch with several rated tradesmen working in your area. We know you will be satisfied with the price and quality of the bids that you receive, and we wish you well with your roofing project too.
Tags: chalk, check, chisel, competent, crack, disturb, fascia, find a roofer, gust, hole, lift, london roofer, loose, loose fit, mark, moisture, overlap, press, rain, remove, rendering, repeat, replacement, roof, roofing quote, separate, settle, soak, tile, water, wind
Posted in Roofing, Gutters & Drainage | Comments Off
Take Care of Your Roof
A roof is almost like a second skin. It protects us from the rain, the heat, the snow and sleet. When it fails though, we have just our own skin left, and that can be a miserable business on a cold, wet rainy night. The moral of my story is that you need to look after your roof.  The easiest way is to get a few Roofers Quotes from a convenient place like Mr-Skill and choose the roof specialists that appeal to you. When they arrive, remember to discuss the following ponts in detail.
o Is the roof covering intact and well attached? Tiles, sheets, thatch and all other roofing materials need firm fixing. If not, you will have leaks, and worse still a gust of wind might even carry a section of roof away.
o Are the ridges still in good condition? Roofs settle over time and ridges sag. They are not just decorative either – lose a ridge and your roof opens up to the sky.
o What about the fascias at gable ends? These are not simply decorative. They also protect the timbers at the roof ends from wind and rain.
o  My old friend who still does the occasional Roofing Job in London reckons that hips and valleys are the areas to watch out for most. Hips are secondary ridges. Valleys carry double water and need thorough flashing too.
o Points where chimneys and vent pipes penetrate a roof can be problematic as well, especially on the upper side if flashing fails. Remember, water going through a roof is moistening timbers and will eventually pass through your ceiling down into your home.
Do not wait until your roof starts leaking unexpectedly on a cold, wet winter’s night. Get Roofing Quotes from Mr-Skill. Get peace of mind too. Sleep well at night. A well-built roof is like a faithful spouse or partner. Look after both, as well as you possibly can.
Tags: attach, chimney, covering, fascia, find a roofer, flashing, gable, heat, hop, intact, leak, loose, ridge, roof, roofer(s) quote(s), roofers London, roofing job london, roofing quote(s), sag, sheet, skin.rain, sky, sleet, snow, speciaslist, thatch, tile, timber, valley, vent, wind
Posted in Roofing, Gutters & Drainage | Comments Off
With New Year upon us, an opportunity arises the review the important things above us in our houses that keep the rainwater where it belongs – outside. This is because we often overlook the things not immediately within eyeball range, especially when we have grown used to them being there.
This is why there are houses all over England with dirty damaged gutters and roofs in need of fixing. Unfortunately  insurance seldom covers neglect – avoid a future disaster and find a roofer on Mr-Skill for an assessment soon. These are the things they are most likely to comment on:
o Ridges, Hips and Valleys are where an expanse of roof terminates in a ridge or gully. These points are usually well sealed, although the joints can crack and open as the roof settles over time. When these fail, expect a flood and a high repair bill too.
o Parapet Walls are popular for cosmetically enhancing flat roofs but can be a disaster when used in conjunction with a sloping roof because of the force of water rushing down. Regular maintenance is needed here.
o Fascia Boards are more than just cosmetic devices because they protect exposed roof timber ends from the elements. Replace a fascia immediately if it comes loose.
o Roofing Materials are typically made up of sheets or tiles. When overlapped correctly they seal well and will last for decades if left alone. Unfortunately a careless person with a heavy foot can cause  damage, leaving a perfect opportunity for water to intrude. Colleagues at Roofers London Associated recommend discussing the risks before allowing a contractor onto your roof.
o Flat Roofs bring with them plenty of opportunities for leaks, although they do work well if properly sealed and left alone. If ever a roof-type required regular maintenance, then this is it.
o Gutters and Downpipes are not quite as critical, although damage can occur to the foundations of your house if water is not property lead away.
If you are concerned about the state of your roof, we recommend that you find a roofer to provide you with roofer quotes. Make sure that you agree an inspection charge up front though, because a professional roof inspection job can take hours to complete.
Tags: bill, cosmetically, crack, damage, drip, facia, fascia, find a roofer, flat roof, flood, gully, gutter, hip, intrusion, joint, leak, loose, parapet, repair, ridge, roof, roofer quotes, roofers London, seal, sheet, tile, timber end, water
Posted in Roofing, Gutters & Drainage | Comments Off
|
Subscribe to our RSS Feed