| |
Posts Tagged ‘finish<’
I find it surprising how so many people put so little thought into the subject of their taps, when they do a bathroom upgrade. After all, these are essential user-interface points, and they must feel right. I’ve heard that some London Bathroom Fitting Firms insist their clients choose their taps themselves, and then design the rest around them.
While this does sound a bit bizarre, it also makes a lot of sense. Many bathroom fitters don’t specify the  taps included in their Bath Fitting Quotes, and could be tempted to dumb designs down if they run over budget. The first thing is to check your relative water pressure – any plumber could do this for you – after which you’re ready to go out shopping.
- Old-fashioned Pillar Taps add a retro feel, and are perfect for twiddling in the bath with toes.
- Mixer Taps are simpler because there is a single outlet and you can feel whether the temperature adjustment is right
- If your cold and hot water pressure is unbalanced go for Dual Flow Mixer Taps instead.
- Monoblocks take things a stage further because now you only have a single leaver you can pre-set.
- If you have an in-bath shower, buy a Shower Mixer that allows you to divert the water up or down.
 The next step is to choose the design itself, which is largely a matter of personal taste. Brass-effect taps provide an invitingly warm effect reminiscent of graceful days. Shiny Chrome is hard to keep looking clean. Matt or satin finishes are all in vogue, and appear likely to remain that way.
Once you’ve made your decision – but don’t buy just yet, you never know – you can Find a Bathroom Fitter on Mr-Skill you can engage in comfort. Don’t take a chance by hiring a possible cowboy off the street. Shop with confidence on Our Website.
Tags: bath fitting quote, bathroom, brass, budget, choose, chrome, design, dual flow, feel, find a bathroom fitter, finish, london bathroom fitting firm, matt, mixer, monobloc, monoblock, pillar, pressure, satin, shower, specify, tap, water
Posted in Other Craftsman Services | Comments Off
Posted in Carpentry & Joinery on Jan 25
I was in an antique shop in London the other day, admiring some really lovely pieces of old furniture and wondering how they got their finishes so smooth. Later in the day I met up with an old London Carpenter friend of mine in a listed City pub. As he ran his hand over the gleaming wooden counter, he let a few trade-secrets slip.
• Wait for a windless day while you prepare a suitable work-place out of the sun
• Assuming you’ve prepared everything properly and that your work-piece is completely dry, give the varnish a proper stir for at least five minutes if not longer.
• Strain the varnish through a silk stocking to get rid of any remaining lumps.
• If you feel a call of nature coming on take that break now, as you are going to work through to completion.
• Moisten the best quality brush you can lay your hands on in the cleaning solvent the varnish manufacturer recommends (this prevents the brush from clogging up).
•  Apply the varnish evenly with a series of long firm overlapping strokes. Do not return to touch-up. Never scrape the brush across the container – it is this action that creates the bubbles.
• Don’t fiddle with your work afterwards and mess it up. Allow it to dry naturally for twenty-four hours before checking in an inconspicuous place.
That sounds like good enough advice for me and I might no longer need to Find a Carpenter for those smaller jobs. However if I decide to re-varnish the wooden staircase in my home the wife is always nagging me about, I think I’ll rather go for Carpentry Quotes on Mr-Skill instead. It’s just so much easier, and inexpensive allowing for the savings on my own time.
Tags: antique, apply, brush, bubble, carpenter, carpentry quotes, clog, container, dry, fiddle, find a carpenter, finish, furniture, london carpenter, lump, moisten, naturally, overlap, prepare, scrape, secret, smooth, solvent, stir, stocking, strain, stroke, sun, tip, touch up, varnish, wind, wood
Posted in Carpentry & Joinery | Comments Off
Posted in Tiling & Flooring on Dec 26
Floor tiles are often set for life, if for no reason other than that taking them up again is such a noisy, dusty business. Here are some things you need to consider carefully before you Find a Tiler on Mr-Skill. We call them rules because they can dictate how you feel about the finished job.
 Rule No.1 Colour
A lighter-coloured floor tile makes a room look spacious while it also shows the dirt and dust. Darker colours add warmth, and hide the dirt. Go for neutral colours to show accessories off best.
Rule No.2 Texture
Wet tiles are slippery and that’s almost a rule in itself. There’s only one way to make a tile suitable for outside use in wet conditions, and that’s to add a gritty finish to the surface. Best to buy yours already done, because the paint-on solutions wear away.
Rule No.3 Size and Shape
A London Tiler worth his money will always determine your overall goals before recommending tiles. Large ones create a sense of spaciousness, while smaller ones may look busy over larger areas.  Rectangular tiles make a room seem wider when laid across the width. Lay them in the length though, and you’ll get the opposite effect
Rule No. 4 Thickness
When you obtain a Floor Tiling Quote it’s a good idea to specify the thickness of the tile. This is because this makes them heavier and more difficult to cut. As a general rule, a medium thickness floor tile is adequate for domestic use, unless you are planning something different.
The 5th Rule is perhaps the most important principle of all, and that’s Choosing the Right Tiler. And that’s where Mr-Skill comes in. We’ve searched high and low for the finest tradesmen across the length and breadth of the United Kingdom, and we’ll not charge a single penny to introduce you to them.
Tags: accessory, choose, cut, dark, deep, dirt, domestic, dust, find a tiler, finish, floor, grit, heavier, length, light, london tiler, medium, neutral, quote, rectangular, rule, select, shape, size, slip, slippery, spacious, texture, thick, tile, tiling quote, warm, wet, wide, width
Posted in Tiling & Flooring | Comments Off
Posted in Plastering & Drywall on Dec 05
After a builder installs a window, or a window fitter replaces one, there’s usually a gap between the window and the wall on either side. Experienced London Plasterers know how to close this in with rendering. In this article though, we focus on a more modern  technique that uses strips of plasterboard instead
This job is nominally within the target range of anybody who is good with their hands. It does require a fair degree of patience though, and those with delicate chests might prefer to avoid doing it on account of dust. Should you decide to go ahead yourself, then these are the essential steps:
- Cut sufficient strips of plasterboard to complete the job. lf the gap is deep, consider using several layers of board as opposed to balancing a single one on large blobs of glue, and being able to finish off the job immediately. When discussing Plastering Quotes you receive on Mr-Skill with bidders, find out how they propose to the job too.
- Apply proprietary dry-wall adhesive to the brickwork on one side of the window. Push a
 plasterboard strip into place using a square edge and spirit level to keep it true.
- Add further layers of strips using the same proprietary dry-wall adhesive, until you have built up to the desired level and flush with the window frame.
- Repeat the process on the other side. Now you can add the angle beading where your work interfaces with the wall, tidy up generally and redecorate.
Of course the third method would be to Find a Plasterer on Mr-Skill, and get on with something else that you’d prefer to do instead. We select contractors with extra-special care, to make sure that each and every trades person we introduce is the best.
To benefit from their expertise and brilliantly lower prices, all you need to do is to Post Your Job for free!
Tags: adhesive, angle, angle beading, bead, brickwork, builder, decorate, dust, find a plasterer, finish, flush, gap, glue, layer, level, london plasterers, new, patience, plaster board, plasterboard, plastering quote, process, push, repeat, replace, square, strip, tidy, wall, window, window fitter
Posted in Plastering & Drywall | Comments Off
I’ve recently sanded down an old wooden table I’m rather fond of and finished it off with a high lustre polyurethane seal. I wish I could claim all the credit for the final effect – just don’t tell anybody I used ideas I gleaned from a retired London Painter living in the village not far from me.
• Work in the best light – That does not mean under blazing overhead light that shines back in your eyes.  What is does mean is natural illumination streaming softly through doors and windows at a low angle. This emphasises the grain that you must accommodate, and turns imperfections into shadows that you can easily see. If you don’t have natural light available, set a desk lamp at one end of the bench.
• Choose the right sandpaper – Sandpaper comes in different colours, although there are no industry rules. Some suppliers use colour to highlight different grit size. Others use it to indicate different types. Choose three strengths of paper designed for the job in hand, so you can work progressively from coarse to fine.
• Use sanding tools – The chances of achieving a level finish using bare hands are low, because fingers are creative things, not mechanised machines. Use a sanding block for a smaller piece of work,  and a power sander for a larger job. Bear in mind that power tools are more productive. Use finer grit paper to counteract the effect.
• Use a jig – Wrap sandpaper around a reverse shape to sand right into a tricky corner, and move your work gently up and down against it. Work carefully – the results can be quite dramatic.
• Check progress as you go along – Put a used nylon stocking over your hand and run it gently across the surface of your work to find rough spots. If you’re a guy though, perhaps you shouldn’t admit to wearing pantyhose in the workshop?
You won’t need to Find a Painter to do a hobbyist job like this. But you will need to get Painting Quotes on Mr-Skill for wooden doors and window frames. Trust me. I tried that. You don’t want to go down that road alone.
Tags: angle, bench, block, check, choose, coarse, colour, door, find a painter, fine, finish, grade, grain, grit, jig, lamp, level, light, london painter, natural, nylon, painting quote, paper, power, progress, reverse, rough, sand, sandpaper, seal, shadow, shine, size, smooth, soft, stocking, strength, table, tool, window, wood, work
Posted in Painting & Decorating | Comments Off
Posted in Carpentry & Joinery on Sep 24
Oftentimes the simplest things are the most enjoyable. Like a small child playing with a paper boat in a stream, or a couple walking hand-in-hand along a river bank. To me though, the gentle sound of a bamboo wind chime resonating gently in the garden is the best sound of all. The good news is that these delightful inventions are so easy to make, that there’s no need to Find a Joiner this time at all.
•  Obtain some lengths of bamboo from the hardware shop or garden centre. These need to be dry so that they resonate nicely, and be of different diameters too.
• Cut different lengths of bamboo from each source. There are two principles here. The diameter affects the depth of resonance or tone, while the length affects the pitch. Remember to ensure that there are no segments within the length you cut, or else the sound will not travel between the ends.
• Knock the lengths of bamboo together gently to check results. You can even tune them by adjusting lengths. Some pieces will work better against each other – these are the ones you need to juxtapose as some do at better London Joining Firms.
• Finish off your bamboo pieces with shaped lower ends like organ pipes. This is done by removing one-half of the last inch or so and tidying up. Some say this affects the pitch. Others like me just think it just looks better that way.
•  Drill holes through the top ends for the hanger-strings. Remember to make these parallel to the bottom detail, so that these all present the same by facing outwards. Attach the strings ensuring they are of the same length, and tie the ends together neatly before hanging the set in an appropriate place that will catch the wind.
• Obtain a spreader disc of an appropriate diameter, and notch it deeply to receive the hanger strings. Set this in place between the strings and hey-presto you have a wooden wind chime. Finally, secure the strings to the spreader disc with hot-melt glue.
How’s that for a bit of fun for a Sunday’s home entertainment. And you don’t need Carpenter Quotes either. Although Mr-Skill is a serious business that matches clients and skilled tradesmen, we also like to give good ideas away. You can decorate your bamboo wind pipes any way you want. Did you notice how easy it is to rearrange the pipes.
Tags: adjust, bamboo, build, carpenter quote, chime, cut, decorate, diameter, drill, easy, end, find a joiner, finish, Garden, garden centre, gentle, hand, hardware shop, juxtapose, knock, length, london joining firm, make, notch, pitch, resonance, resonate, segment, simple, spread, string, test, tone, tune, wind, wind chime
Posted in Carpentry & Joinery | Comments Off
The last components that are fitted when assembling modern baths are the front panels themselves. These clip easily into place, and clip out easily too in order to provide access to drains and pipes. Because bath sizes are standardised these days, it follows that it is equally easy to replace an existing panel on a modern bath.
 This represents a superbly simple way to add new panache and style and colour to existing bathrooms for a fraction of the cost of refits, and you don’t necessarily require Bathroom Fitting Quotes before you start. In fact, the biggest task is often selecting the right bath panel from the range of options.
We recommend that you resist the urge to install anything that is capable of absorbing water, whether this spills over the bath-rim, or is present in the form of humidity or steam. This puts paid to romantic ideas of natural wood unfortunately. Speak to any London Bathroom Fitter and you should always receive the same consistent message – stick to fibreglass or plastic, or there is no guarantee.
Fortunately these modern materials come in all kinds of finishes and colours, and being mouldable are available in different profiles too. You will have to shop around if buying directly from the manufacturers though.  Moulds are expensive meaning that each factory offers a strictly limited range.
As you shop around you are bound to be impressed by the huge variety of designs available, especially if searching on the internet. Mr-Skill’s advice is to keep things simple unless you have a farmhouse bathroom. Light colours and less intrusive designs work best in smaller spaces.
Although is possible to replace a bath panel yourself, you may prefer to Find a Bathroom Fitter on Mr-Skill instead. That’s because you could find it difficult working on your knees in cramped spaces, and you could also end up damaging the material as well. If you choose your panel wisely though, then you should inevitably be enthralled by the stunningly refreshed effect. Isn’t it nice to know that some home improvement projects are so easy?
Tags: absorb, access, bath, bathroom, bathroom fitting quotes, clip, colour, component, cost, cramp, damage, design, drain, fibreglass, find a bathroom fitter, finish, fit, guarantee, humidity, install, intrusive, light, london bathroom fitter, material, mould, option, panel, pipe, plastic, refit, replace, simple, size, spill, steam, style, variety, water, wood
Posted in Painting & Decorating | Comments Off
Posted in Bricklaying on Sep 07
Sometimes finishing off the joints between bricks can seem like a never-ending chore, unless you have years of experience as some Bricklayers in London may. This is because bricks are naturally made products, and have all sorts of holes and cracks where plaster may collect. If you are contemplating a DIY job such as building a smaller set of steps, then you can try to bridge your experience gap with tips like these.
•  Buy a decent set of tools. I cannot over-emphasise the difference that a shiny new float or builder’s trowel can make, and these are inexpensive too. So throw away your rusty set and make a fresh start on your next job.
• Decide on the type of joint you want. There are a variety of different strokes for different folks, and the right solution is usually the one that you prefer the most. Some people like full grouted joints requiring fewer tools, while others want recessed, hand-tooled ones that take a little extra time. Remember to specify what joints you may require when calling for Bricklaying Quotes on Mr-Skill, as this may affect the price.
• Don’t be shy with masking tape. This may be frowned on by professionals, but can be a dab trick for weekend builders such as you and me. Time and effort spent improving techniques this way, can produce really professional looking jobs that you can be proud of too.
•  Use a grout bag or grout gun. Believe me; these make the difference between pain and pleasure. This is because they are not only quick to use, but they also make a whole lot less mess. And yes, you could even save a little plaster, although this is often more in the salesperson’s mind.
• Use a jointer’s tool to create recessed grout lines. This is essential equipment for scooping out surplus grout material, and I doubt you will Find a Bricklayer anywhere who does not have at least one in their kit. The trick is to add a little more material when required, as opposed to applying too much in the first place.
Not an awfully difficult job to do, although grouting bricks can be fiddly and frustrating. Attempt the job yourself by all means if you have lots of patience and spare time. Otherwise, why not Find a Skilled and Rated Tradesman on Mr-Skill instead, to take the hassles (and the cement) off your busy hands.
Tags: add, brick, bricklayers in london, bricklaying quotes, cement, clean, crack, DIY, experience, find a bricklayer, finish, float, flush, full, grout, hint, hole, joint, line, mask, masking tape, mess, natural, new, plaster, professional, recess, render, rust, save, scoop, shiny, skill, specify, step, technique, tip, tool, trowel
Posted in Bricklaying | Comments Off
Posted in Bricklaying on Aug 12
Most brick walls are finished off with some or other kind of capping, which is called coping in the trades. While the main purpose of this is to prevent water seeping into the structure, coping also often provides a decorative feature too. Coping may be pitched or flat according to the tastes of the designer.  The most important thing of all though is to ensure that the coping is at least an inch wider that the finished wall, and preferably an extra inch wider in total too. This is to prevent capillary action dripping off the surface onto the wall itself.
Do you need to Find a Bricklayer on Mr-Skill to lay coping for you? Perhaps not, if you are reasonably skilful and have the right tools. But definitely, if the wall is high or if the site is dangerous in other ways.
o Span a suitable length of builders twine along the wall at a height above it equal to the coping plus the settled bed of mortal. This is a critical factor for success, so take your time. Mark the approximate position of each coping stone, to determine where to start and where to site the filler piece.
o Mix sufficient mortar, but not more than you can use in one hour. Lay a generous bed of it along the top  of the wall, starting at one end and one and half times the length of a single coping stone. Make regular slashes in it to help your work bed down nicely.
o Set the first coping stone in place remembering to obey the level of the builders twine. Immediately check your levels in both directions and adjust where necessary. Continue on the same basis without worrying too much about filling in the grouting. This is often easier the following day when the stones have settled. London Bricklayers invariably like do this the same day though, because they do not want to have to come back again.
This really is a simple job, provided you have the time and patience, and a straight eye too. If you lack one or more of these, then why not Ask Mr-Skill for Bricklaying Quotes instead. Our tradesmen are competent and pleasant enough to work with, and their rates are really keen.
Tags: bed, brick, bricklaying quotes, cap, capillary, capping, competent, coping, dangerous, decorative, filler, find a bricklayer, finish, grout, height, high, lay, level, london bricklayer, mix, mortar, patience, rate, seep, set, settle, skill, slash, straight eye, time, tool, top, twine, wall, water, wide
Posted in Bricklaying | Comments Off
Posted in Plastering & Drywall on Aug 09
After you remove outdated paneling from a room you may be horrified with what you find. This is especially likely to be the case if it was fitted over raw brickwork to save time and money. In this case you probably have  no choice but to Find a Plasterer at Mr-Skill. Here’s short description in layperson’s terms of what you are entitled to expect.
o Plaster has a way of getting into everything and is designed to stick to most things too. So do yourself a huge favour first. Present the plasterer with a few rolls of blue painter’s tape and a pair of sharp scissors you won’t mind spoiling. Then ask them to mask their work area off thoroughly before they start. Make sure their drop sheets are firmly taped into position too.
o Expect them to start plastering at the top of the wall and to work down. There are several reasons for this, including not messing on the work they have just done.  The first layer will have a rough finish to it but don’t worry – it’s just the base coat.
o An experienced London Drywall Builder may be able to apply the second plaster layer later the same day, while others may prefer to return the following morning. The job of this coat is to fill in all the hollows in the base coat. This may be sufficient, or a third final skim coat may be necessary.
After the plaster has dried out thoroughly you could finish off any imperfections with a light sanding. After that, it’s time to seal, undercoat and paint. It’s not as easy a job as it sounds though. May we recommend a few competitive Plastering Quotes on Mr-Skill instead? You may find that the extra cost was well worth your while, as you visualise what you had there before. Now how’s that for a fairly radical improvement.
Tags: base, brickwork, coat, drop sheet, dry, find a plasterer, finish, imperfection, job, layer, london drywall builder, mask, mess, money, paint, panel, plaster, plastering quote, raw, rough, sand, scissors, seal, skim, start, stick, tape, time, top, undercoat, work
Posted in Plastering & Drywall | Comments Off
|
Subscribe to our RSS Feed