| |
Posts Tagged ‘overlap<’
Posted in Bricklaying on Feb 13
Before you rush off and Find a Bricklayer on Mr-Skill to lay your brick paving, you first need to understand the theory of brick bonds. That’s because they are butted up against each other as opposed to being cemented. In a very real sense, we are talking about unity in strength here. If one comes loose others will soon follow.
 Jack-on-Jack works well provided your pavers are identically-sized and your bricklayer has a straight eye too. They are bad news in a long narrow run where every defect shows.
Running Bond is a bit more robust because the joints are overlapped. This can help prevent the rows from staggering. It is however a very common pattern that often fails to excite.
 Basket Weave is a further enhancement because the joints are contra-staggered adding further strength. The bricks actually form sets of squares that can look extremely pleasant.
Half Basket Weave is a variation of the previous bond that gets away from squares to create a pattern that seems almost random. Note though that patches of Jack-on-Jack recur from time to time.
 Herringbone is in many ways the perfect solution. The joints all overlap and the pattern is not noticeable unless you look for it. This is a strong bond, particularly when the pavers are correctly but-jointed.
Diagonal Herringbone is an interesting variation on the theme that helps soften rectangular spaces. Just make sure the triangular filler-pieces are sized to that everything fits in well together.
Some London Bricklayers employ specialist staff that only lay one kind of pattern. Check this out with them before you ask them to submit a Bricklaying Quote. Otherwise you could come home to find the pattern laid that you least wanted.
Tags: basket weave, bond, brick, bricklaying quote, but, cement, diagonal, filler, find a bricklayer, half basket, herringbone, jack, jack on jack, london bricklayer, overlap, pattern, paver, paving, running, running bond, size, square, stagger, straight
Posted in Bricklaying | Comments Off
Posted in Carpentry & Joinery on Jan 25
I was in an antique shop in London the other day, admiring some really lovely pieces of old furniture and wondering how they got their finishes so smooth. Later in the day I met up with an old London Carpenter friend of mine in a listed City pub. As he ran his hand over the gleaming wooden counter, he let a few trade-secrets slip.
• Wait for a windless day while you prepare a suitable work-place out of the sun
• Assuming you’ve prepared everything properly and that your work-piece is completely dry, give the varnish a proper stir for at least five minutes if not longer.
• Strain the varnish through a silk stocking to get rid of any remaining lumps.
• If you feel a call of nature coming on take that break now, as you are going to work through to completion.
• Moisten the best quality brush you can lay your hands on in the cleaning solvent the varnish manufacturer recommends (this prevents the brush from clogging up).
•  Apply the varnish evenly with a series of long firm overlapping strokes. Do not return to touch-up. Never scrape the brush across the container – it is this action that creates the bubbles.
• Don’t fiddle with your work afterwards and mess it up. Allow it to dry naturally for twenty-four hours before checking in an inconspicuous place.
That sounds like good enough advice for me and I might no longer need to Find a Carpenter for those smaller jobs. However if I decide to re-varnish the wooden staircase in my home the wife is always nagging me about, I think I’ll rather go for Carpentry Quotes on Mr-Skill instead. It’s just so much easier, and inexpensive allowing for the savings on my own time.
Tags: antique, apply, brush, bubble, carpenter, carpentry quotes, clog, container, dry, fiddle, find a carpenter, finish, furniture, london carpenter, lump, moisten, naturally, overlap, prepare, scrape, secret, smooth, solvent, stir, stocking, strain, stroke, sun, tip, touch up, varnish, wind, wood
Posted in Carpentry & Joinery | Comments Off
Roofers lay tiles loosely over each other in an overlapping pattern, and hold them in place with edging fascias, and special tiles cemented in place along the ridges. If these ridges fail, then there is a possibility of a strong wind lifting sheets of roof tiles with disastrous results. This fairly common problem usually begins as roofs settle after the first few years, and  the rendering beneath the ridges separates.
This is not a job for an amateur with a bad head for heights. In fact, we strongly recommend that you Find a Roofer to do the following work for you instead.
• Identify which ridge tiles have worked loose. This could be just one, a few, or the entire ridge, and the solution varies accordingly. If you can remove the loose tiles without disturbing the adjacent ones then this could save you time and money, although it is unwise to take chances and end up with a patch job.
• Obtain a supply of replacement ridge tiles. Remove offending ridges, set them aside and carefully chisel the loose rendering off the roof tiles beneath. You can leave a small residue of old rendering behind, provided that this is firmly attached.
• Soak the replacement ridge tiles and the supporting roof tiles with clean water until they have taken up a slightly darker hue. This ensures that they do not suck the moisture out of the new rendering, and weaken it.
•  Loose fit a new ridge tile, make a chalk mark on either side of it, and set it aside again. Lay two generous lines of suitable tinted rendering within the chalk lines. Press the ridge tile gently into place and remove any surplus rendering with trowel and damp cloth. Repeat the process as necessary along the entire ridge, remembering to close in the ends of the last ridge tiles if you replaced these too.
• A competent London Roofer will always check carefully that there are no cracks or holes showing anywhere on the ridge. This is because a strong gust of wind can blow rainwater through a tiny hole into the roof space below with surprising force, and form damaging pools on ceilings.
Should you decide to get a Roofing Quote on Mr-Skill, then we would be delighted to put you in touch with several rated tradesmen working in your area. We know you will be satisfied with the price and quality of the bids that you receive, and we wish you well with your roofing project too.
Tags: chalk, check, chisel, competent, crack, disturb, fascia, find a roofer, gust, hole, lift, london roofer, loose, loose fit, mark, moisture, overlap, press, rain, remove, rendering, repeat, replacement, roof, roofing quote, separate, settle, soak, tile, water, wind
Posted in Roofing, Gutters & Drainage | Comments Off
Posted in Bricklaying on May 10
 When you are in the process of considering Bricklayer Quotes on Mr-Skill you may find yourself bombarded with bricklaying jargon. The following are some of the commonest terms that you may encounter.
Bricks are glued together with a mixture of cement, sand and water that sets hard. Brick bonds, which are brick-laying patterns, add extra strength to joints between bricks by adding overlaps. These bonds may be varied between different courses of bricks to create visual interest. Effects can be quite remarkable when bricks of different colours and textures are used.
 XXX
o The Stretcher Bond remains the commonest bricklaying pattern in use today. This is because it is time efficient and easy to apply. It is universally used inside plaster walls where a cosmetic effect is unnecessary. It is also the only bond possible in a single brick wall. Bricks laid in this way are called stretchers. This is the commonest recommendation you may receive after you Find a Bricklayer on Mr-Skill.
o The Flemish Bond may be used to create stunning effects where different colour bricks are used. It is also immensely strong because every course is a  combination of alternating stretchers and headers.
o The English Bond is similar in concept except that courses of headers and stretchers alternate. Although it is equally strong there are fewer opportunities for visual effects. It is ideal for use in areas of heaving clay or repeated earth tremors.
o The American Common Bond is a further variation on a similar theme, except that this time complete rows of headers and stretchers alternate. This is an attractive wall with many decorative possibilities, especially when different textures of bricks are used.
XXX
A Bricklayer in London is often left with little choice of bond to use when building in the older parts of the City. This because the City Fathers want things to blend in with the prevailing patina, which many believe to be more attractive than some recent modern buildings.
More good ideas from Mr-Skill published in the interests of transparency.
Tags: american bond, blend, bond, brick, bricklayer(s) quote(s), bricklayers London, bricklaying, bricklaying job london, bricklaying quotes, cement, colour, common, effect, english bond, find a bricklayer, flemish bond, header, jargon, overlap, patina, pattern, sand, stretcher, stretcher bond, texture, water
Posted in Bricklaying | Comments Off
|
Subscribe to our RSS Feed