| |
Posts Tagged ‘unit<’
Posted in Kitchen Fitting on Nov 02
There’s nothing quite as sad as a worktop with a corner broken off, or burned by a hot saucepan or an electric iron. Fear not. A replacement is not as expensive as you think, even when done by a London Kitchen Fitting Firm.
•  Obtain a replacement piece that’s cut to size, and edged-off at any exposed end / ends. In that case, remember to allow an overhang that matches the other worktops as closely as possible.
• Clear the old worktop of everything. Remove the cabinet doors and clear the units completely. Carefully inspect for stains or water damage, because this is the best chance you’ll have to do repairs for some time.
• Remove the seal between the worktop and the tiles, and rout out any grout taking care not to chip or crack the tiles. Take your time – this is where you make a professional difference. If the gap is tight, you might need to Find a Kitchen Fitter to assist.
• Remove the screws that attach the worktop to the cabinetry from underneath, making sure you find them all. Double-check that the top is clear of all the tiles, and then gently work it loose. You must work evenly and gently to avoid any contact with the tile edges.
•  When completely free, remove the old worktop from the kitchen. Vacuum up all the dust. Wipe the surfaces clean and have a cup of tea. You’re past the halfway point!
• Lay the new top roughly in position, and gently move it into the space between the cabinetry and tiles. Attach it to the cabinetry from underneath, using the old holes and similar screws. Grout in the gap, and when this is dry add a bead of silicone. Now you can re-fit the doors and get on with your life. What a pleasure – damage controlled.
This information is provided with the compliments of Mr-Skill, although we recommend that only experienced people attempt this project. Should you decide to obtain Kitchen Fitter Quotes instead, we assure you of our best service, and top value in the industry too!
Tags: broken, burn, cabinet, chip, clean, counter, crack, cut, damage, door, dust, edge, end, expose, find a kitchen fitter, grout, inspect, kitchen, kitchen fitter quote, london kitchen fitting, loose, overhang, remove, repair, replacement, screw, seal, silicone, stain, tile, top, unit, vacuum, water, wipe, work, worktop
Posted in Kitchen Fitting | Comments Off
Posted in Kitchen Fitting on Mar 22
As we get more gadgets in the kitchen, worktop space just seems to drift away. Eventually we get to the point when we feel like getting Kitchen Fitting Quotes to rip everything out and  start again. However, is this really necessary? Perhaps we ought to learn to work smarter instead, and save some money. Here are a few of the better tips that I acquired through the years:
o Buy a cutting board that fits over the sink, instead of taking space on a countertop. An added advantage is ease of cleaning up afterwards.
o If you have the luxury of space, then why not add a central preparation island. This provides extra working space, and there is room for storage space below for pots and pans.
o Perhaps you could extend a kitchen counter top in the length. Think laterally – this could also be a fold-down shelf that tucks away neatly when not required.
o Have a friend comment on how you use your under-counter storage space. We all keep things we never use in kitchen drawers. Be strong – DECLUTTER.
o  Every Kitchen Fitting London Job includes fitting door racks. You can store all kings of things this way. Kitchen towel, jars, bottles, spices – the list is almost endless.
o Fit a pot and pan rack above the stove. You could clear an entire cabinet like this, and no longer have to stoop down to find them either.
o Look for space to fit slide-out mobile storage units in gaps between appliances and cabinets.
o Use hanging baskets to store fruit and vegetables. They stay fresher longer, look great and you also know when you need to buy more.
This works for you. That’s great. No good? Ah well, then perhaps it is time to Find a Kitchen Fitter on Mr-Skill, after all. At least you tried.
Tags: counter, cutting board, door rack, drawer, find a kitchen fitter, gadget, hanging basket, island, kitchen, kitchen fitter london, kitchen fitter quote, kitchen fitting london, kitchen fitting quotes, mobile, pan, pot, room, sink, space, storage, store, top, under counter, unit, work smart
Posted in Kitchen Fitting | Comments Off
Posted in Kitchen Fitting on Feb 01
Base and wall-mounted kitchen cabinets are similar in construction, with the exception of the following three notable differences:
o Base units are finished off with separate worktops while wall mounted ones come complete with capping boards
 o Wall-mounted ones are not as deep from front-to-back as floor standing ones – this is so you don’t bump your head when you work beneath them.
o Cabinets on the wall come just with shelves, while floor-standing ones may house accessories like drawers and other modules too.
With these three exceptions, the process of assembling and mounting upper and lower cabinets, and fitting doors is similar. Many homeowners get Kitchen Fitting Quotes though, after they discover what is involved.
Assembling Carcasses
Unpack everything in open floor space, checking for damage as you go along and taking care not to damage exposed edges. Assemble according to the manufacturer’s instruction, making sure that the  carcasses are true and square. Match doors to frames and label accordingly.
Installing Carcasses
Install the upper units first. Temporarily mount a level batten along the wall where the bottoms of the wall-mounted carcasses will rest. Have an assistant rest each in position and attach it firmly to the wall. After all the carcases are mounted screw them together tightly. Remove the temporary batten. Seal right around them to keep insects away.
After aligning and leveling the floor standing units carefully, screw them to each other, push them firmly back and attach them to the wall. Fit the kick plates and seal all gaps against insects as well. Does this sound like far too much work to do when you get home from work? Why not Find a Kitchen Fitter on Mr-Skill instead?
Fitting Doors and Handles
 Attach the hinges to the doors using a template to locate them if necessary. Offer the first door up to the opening with the hinges fully open. Mark screw holes, punch out lightly and attach the hinges to the cabinet. Make rough adjustments. When all doors are installed, adjust finally again, so that the tops line up, and the shadow lines are similar. Attach the handles, using a template to make sure they align too.
Sounds easy, doesn’t it? Not actually. A Kitchen Fitter in London trains staff for an average two years before they appoint a person to head their fitting team. Perhaps you ought not to practice on your expensive new kitchen fittings either.
Tags: accessory, assemble, attach, base, batten, cabinet, capping, cascass, damage, depth, door, find a kitchen fitter, frame, handle, hinge, inspect, kitchen, kitchen fitter london, kitchen fitter quote, kitchen fitting london, kitchen fitting quotes, level, mount, screw, seal, shadow line, square, template, true, unit, wall, wall mount, worktop
Posted in Kitchen Fitting | Comments Off
|
Subscribe to our RSS Feed