| |
Posts Tagged ‘work<’
Mr-Skill loves recycling because it avoids over-filling our tips, and it saves on the pocket too, when there is no need to buy new bricks. Assuming your bricks are re-usable after demolishing your old wall, he also suggests that they will make for a rustic and creative effect as you build a new wall. 
All it needs is an investment of time and the application of a little elbow-grease – imagine the feeling of accomplishment when it all comes together. If you don’t have the skills to lay bricks, you can still make a positive contribution by preparing the old bricks for re-use, while you find a bricklayer here on Mr-Skill.
Old for New
Set up a production line in a quiet spot in your yard. Then, examine each broken brick piece and decide which ones to keep, and those destined for the rubble pile. For those that are re-usable, it is a case of tidying up the broken face so that all sides are reasonably flat for the re-building job.
Using a pencil, mark up where you plan to cut out the damaged part of the old brick. Carry your marked line around all four faces to facilitate a flat face for the section you are about to level. Now you can go to work with your chisel, working methodically and safely – don’t forget the goggles and gloves!
Laying out the New Course
If you have decided this bit is not for you, you will have to get a bricklaying quote – remember to ask for some discount because of all the preparation work you have already done. If you are going ahead yourself:
- Spread out the prepared mortar evenly along the foundations of the new wall using a trowel.
- Spread a decent layer of mortar on either side of the brick before laying it on the foundation – you could do this in your hand or once the brick’s laid in position, making sure to anchor the bricks firmly in the mortar.
- Continue along the new brick course until you have completed a row, and so on. One of our London bricklayer chuckles that the beauty of using old bricks is that you can trim them to all sorts of shapes and sizes to fit all the nooks and crannies.
Mr-Skill adds that if you have reached this far without fuss, then you are a natural bricklayer, and you should look to joining up as a member!
Tags: anchor, brick, bricklaying quote, broken, chisel, demolishing, discount, find a bricklayer, foundation, gloves, goggles, investment, london bricklaying, mortar, recycling, rubble, safety, trowel, wall, work
Posted in Bricklaying, Project Advice | Comments Off
Last month, Mr-Skill posted a couple of articles on the subject of safety. The first specifically related to electrical safety, while the other talked about general safety awareness. In an on-going effort to get this vital message across, we are going to discuss safety in broad terms here. We’ll cover protective clothing, footwear, headgear, tools and a basic understanding of why we all need to be safety conscious and alert. Before we start, a quick word from our many sponsors – we have several skilled experts right here on Mr-Skill – you can find your qualified electrician right now!
Why We Need Safety
Ever since the early days of the Industrial Revolution, the well-being and protection of workers has been evolving rapidly. To begin with life was cheap, labour inexpensive and in plentiful supply, and observing basic safety was not a priority for factory owners and industrialists. These days, we have comprehensive labour laws to protect everybody in the working environment.
Historically speaking, many horrendous work-place disasters have occurred. Investigations into the causes were always enlightening, but if one good thing did emerge, it was the refinement and enforcement of strict new rules, and the introduction of accountability. Unfortunately, quite a number of workers continue to pay the ultimate price while trying to complete their work at all costs.
Safety Apparel
Clothing
Over the centuries, workplace clothing has evolved with safety in mind. Clothing not only protects the body it is covering, but also prevents burns and lacerations, as well as harmful chemical spills on the skin. Appropriate protective clothing is an important safety consideration across all trades, particularly those with moving machinery.
Head Gear
This includes hardhats, goggles and headphones to protect the head, eyes and ears respectively. Face masks too, are important in many occupations. Mr-Skill would like to remind you of the many signed-up members – for example, you can get your plumbing, heating and gas quotes right here in confidence.
Footwear and Hand Protection
Inadequate foot protection continues to result in grotesque accidents in the work place. Proper safety shoes and boots are an absolute must in many of our trades. Likewise, our hands are the tools of our bodies and need protection under harsh working conditions.
Tools 
Over the years tools have become more sophisticated, often with the user’s safety in mind. Tools include not only equipment we use with our hands, but items that we stand on – ladders and scaffolding for example – and machines that we operate too.
Developing an Understanding
A last word from one of our London general building experts: “These days, training and skills development play a vital role in promoting safety in the workplace. The word ‘workplace’ extends to every place of work, and covers hospitals and care homes, transport, shops, factories, business premises and, yes, including our homes! You can never forget ‘safety’ for a single moment, because if you do, the consequences could prove fatal. Please don’t cut corners or take chances.”
Tags: disasters, ear protection, eye protection, find an electrician, foot protection, gloves, head protection, home, labour laws, london general building expert, plumbing-heating-and-gas quote, protective clothing, safety, safety rules, skills development, training, work, work aparrel, work environment, workplace safety
Posted in Electrical Work, General Building, Plumbing, Heating & Gas | Comments Off
Posted in General Building on Jul 30
Here at Mr-Skill, we really take the subject of safety very seriously. Our message goes out to all employers and workers and of course the home handyman, DIY-type too. We firmly believe that by observing some basic down-to-earth safety rules, you can tackle any job without the risk and threat of personal harm. Any injury is one too many, and don’t forget that you can find a general builder right now on Mr-Skill’s website. 
Illustrating the Point
One of our London General Builders found the following interesting report back on the HSE website. HSE stands for the Health and Safety Executive, and is the independent national watchdog for work-related health, safety and illness. They are an independent regulator, and act in the public interest to reduce work-related death and serious injury across Great Britain’s workplaces.
“A Birmingham metal recycling company has been prosecuted after a worker trapped and broke his arm in an unguarded conveyor belt.”
“Two firms have been prosecuted after a worker suffered serious injuries when he was struck by a pipe and fell from a stepladder.”
“A Nottinghamshire die-casting firm has been fined after an employee suffered severe burns when he fell into a furnace.”
“A tour operator and a ship management firm have been fined after workers were exposed to asbestos fibres during refurbishment work on board a cruise ship.”
“A Derbyshire recycling firm has been fined after an employee was crushed in a machine at their depot at Griffon Road, Ilkeston.”
“Two workers were fortunate to escape with only minor injuries when they fell from a school roof in Didsbury, a court has heard.”
“A Bolton fabric manufacturer has been sentenced after one of its employees lost a finger when his hand became trapped by a rotating cog.”
Mr-Skill acknowledges with thanks, the above contribution from the HSE.
A Clear Message
We again remind all readers that before undertaking any job around your home or business, you should always think about safety issues first. If you intend appointing a contractor to do the work for you, make absolutely certain that they are safety conscious and fully compliant with Health and Safety issues at all times.
Mr-Skill has many members ready to provide a general building quote right now. If you are doing the work yourself, don’t cut corners and take chances. Accidents are all too common-place, and can be avoided simply by observing basic safety rules at all times.
Tags: accident, burns, care, compliant, contractor, DIY, find a general builder, general building quote quote, harm, health, Health & Safety Executive, illness, injury, job, London general builder, safety, safety conscious, safety rules, work, workplace deaths
Posted in General Building | Comments Off
Posted in Handyman Services on Dec 22
Mr-Skill exists to help its UK customers find skilled and competent craftspeople working in just about every postcode. These skilled artisans pay us a modest fee for listing on our website, and to get access to enquiries. Our customers pay us nothing for the service.  And that’s the way it ought to be. That’s because customers are the people that keep the wheels of business moving.
When a customer posts an enquiry for work that’s needing doing, every related tradesperson on our lists gets to hear about it from us. When they quote directly back to customers, they know that theirs is not the only quote. What better incentive could there be to keep rates down? Moreover, we act as intermediaries in the unlikely event of a dispute arising.
Out of interest, the following jobs are currently out there waiting for Handyman Quotes:
- Clearing gutters and hanging up Christmas lights outside. Happy Noel!
- Attaching a television wall-mount and putting up a kitchen cupboard
 Drilling a hole in a concrete ceiling. This customer needs to Find a Handyman to put up a hammock.
- Putting up a roller blind and curtain rail. No further information given.
- Installing a washing machine. The customer needs hot and cold water and is on a tight budget.
- Assembling a plastic shed. That’s an unusual one we’ve not seen before!
We have all kinds of Handypeople available to do jobs like these. They range from London Handymen who sometimes have a trade but prefer variety, right through to traditional country lads who turn up on bicycles. Why not give our free service a try right now?
Tags: artisan, ceiling, christmas light, concrete, craft, curtain rail, customer, dispute, drill, find a handyman, gutter, hammock, handyman quotes, hole, job, kitchen cupboard, lad, light, london handymen, quote, rate, roller blind, shed, skill, television, trade, wall mount, washing machine, work
Posted in Handyman Services | Comments Off
Posted in Carpentry & Joinery on Nov 24
While parents may still find them handy for tracking teenagers in and out at night, the truth is that a squeaking floor is an irritating thing that is literally crying out for your attention. Before you look for cost-effective Carpenters Quotes on Mr-Skill, you may like to try out these handy ideas first.
 Floor boards creak for one of three reasons, and these are some of the things you can do to fix them – possibly by yourself – once you have walked the floor and found the source:
1. They are incorrectly fitted and rubbing up against each other. Pour a little talcum powder into the crack and work it in by pressing up and down with your foot. If this works, repeat the treatment regularly.
2. The nails holding them down have worked loose. If at all possible, remove the nails completely and replace them with wood screws. If not, you may have to fit new screws separately, hammer the old nails in as best you can, and fill the nail heads with filler. Start with two screws, each towards the outer edge of the board, remembering to countersink them. Only add a middle one if necessary.
3.  The floor support is inadequate. This is a major job and you need to Find a Carpenter on Mr-Skill to do the job for you. They will remove a section of floor boards, add additional supporting battens and re-lay the floor. If done correctly by a professional there is no reason why the job will not work. Done incorrectly by a cowboy though, and it could cost you the floor.
There are Experts in London Carpentry on Mr-Skill, and specialist carpenters working in almost every other United Kingdom postcode too. When you Hire a Skilful Tradesman here, you not only get one with all the correct papers. You also get to save pounds off normal market rates.
Tags: add, batten, board, carpenters quotes, countersink, creak, fill, filler, find a carpenter, floor, floorboard, hammer, incorrect, lay, london carpentry, loose, nail, paper, powder, professional, rate, reason, relay, remove, replace, rub, save, screw, section, specialist, squeak, talcum, work
Posted in Carpentry & Joinery | Comments Off
Posted in Handyman Services on Nov 16
I wish that I could to Find a Handyman on Mr-Skill for every weekend of the year. There are so many jobs waiting for me around the house, but the wife thinks that being busy keeps me fit and healthy. The more I say “we have the money” the more I’m told to get on with the work myself. So all that I can do is dream of what might otherwise have been.
First Weekend
 The first job every month would be to deal with water run-offs. I’d have the gutters and downpipes cleared out and wiped down nicely. Then we’d rod out the storm-water drains and get rid of all weeds together. What a pleasure. Come on rain.
The Second Weekend
No doubt the weather would hold off now that the drains were cleared, so the next job would be to sort out the garage. Not even a pair of London Handymen would know exactly where to put things, so I guess my participation would be unavoidable
Weekend Number Three
There’s never been three rain-free weekends in the UK since time began or so I’m told. This time I think the handyman could wipe all the interior woodwork down, and get rid of all that mould. I’d get on with  something else nearby, just to keep an eye on things, if you know what I mean?
The Fourth Weekend
By then, of course we’d be quite a team. I’d know the other person’s skills and start getting extra mileage from their Handyman Quote. There’s nothing quite like having an extra pair of hands around the house, especially when it comes to carrying things.
In practice this would never happen, and if it did the wife would say “now what’s the point of Getting in a Handyman on Mr-Skill when you do half the work yourself’? Sometimes it seems that only another man would understand. Or did I perhaps overlook something in my haste?
Tags: busy, carry, downpipe, drain, find a handyman, garage, gutter, hand, handyman quote, house, job, london handymen, month, mould, rain, skill, team, water, weather, weed, weekend, wipe, wood, work
Posted in Handyman Services | Comments Off
Posted in Locksmith on Nov 07
There’s nothing quite as unnerving as arriving home from holiday, and finding you’ve either lost your key or the front door lock refuses to budge. This unfortunately boils down to a lack of care or just stupidity. I can say that, because I’ve been guilty of these oversights myself when I was younger.
 Lost Keys – The solution is as simple as people’s failure follow it is incredulous. Leave a spare set of keys with a good friend you trust, so they can visit your home from time to time too. That way, you may never need to Find a Locksmith at such an inconvenient hour.
Jammed Locks – It’s a funny old thing, isn’t it? We update our ant-virus databases and we even sometimes mow our garden lawns. Yet we leave our essential door and window locks to take care of themselves completely, when all you need to do is the following:
• Lubricate all your exterior door locks with a puff of graphite powder (not oil because that will attract the dirt and dust). Lock and unlock them several times to work the lubricant in. If the lock is exposed to the elements and seldom used, consider taping over the outside keyhole with a piece of weatherproof tape to keep the moisture out.
•  The advice of every London Locksmith and all others lock repairers too is to take action as soon as a lock starts giving trouble. If you can open the door or window you could change the lock yourself. At the least you could possibly avoid paying overtime rates.
• Inspect your keys monthly for signs of damage, and never, ever use worn ones. That’s because a broken piece of key can be impossible to remove, necessitating an expensive repair.
Whatever else you do please do not overlook the need to maintain your locks. Did we mention you can get Locksmith Quotes on Mr-Skill too? You’ll find the rates more than competitive and our service exemplary. Isn’t that good to know. Remember that in times of trouble we’re here for you.
Tags: break, broken, budge, care, change, damage, door, element, find a locksmith, friend, graphite, inspect, jam, key, lock, locksmith quotes, london locksmith, lose, lost, lubricate, maintain, moisture, oil, powder, rate, remove, replace, solution, spare, stuck, tape, weather, window, work
Posted in Locksmith | Comments Off
Posted in Kitchen Fitting on Nov 02
There’s nothing quite as sad as a worktop with a corner broken off, or burned by a hot saucepan or an electric iron. Fear not. A replacement is not as expensive as you think, even when done by a London Kitchen Fitting Firm.
•  Obtain a replacement piece that’s cut to size, and edged-off at any exposed end / ends. In that case, remember to allow an overhang that matches the other worktops as closely as possible.
• Clear the old worktop of everything. Remove the cabinet doors and clear the units completely. Carefully inspect for stains or water damage, because this is the best chance you’ll have to do repairs for some time.
• Remove the seal between the worktop and the tiles, and rout out any grout taking care not to chip or crack the tiles. Take your time – this is where you make a professional difference. If the gap is tight, you might need to Find a Kitchen Fitter to assist.
• Remove the screws that attach the worktop to the cabinetry from underneath, making sure you find them all. Double-check that the top is clear of all the tiles, and then gently work it loose. You must work evenly and gently to avoid any contact with the tile edges.
•  When completely free, remove the old worktop from the kitchen. Vacuum up all the dust. Wipe the surfaces clean and have a cup of tea. You’re past the halfway point!
• Lay the new top roughly in position, and gently move it into the space between the cabinetry and tiles. Attach it to the cabinetry from underneath, using the old holes and similar screws. Grout in the gap, and when this is dry add a bead of silicone. Now you can re-fit the doors and get on with your life. What a pleasure – damage controlled.
This information is provided with the compliments of Mr-Skill, although we recommend that only experienced people attempt this project. Should you decide to obtain Kitchen Fitter Quotes instead, we assure you of our best service, and top value in the industry too!
Tags: broken, burn, cabinet, chip, clean, counter, crack, cut, damage, door, dust, edge, end, expose, find a kitchen fitter, grout, inspect, kitchen, kitchen fitter quote, london kitchen fitting, loose, overhang, remove, repair, replacement, screw, seal, silicone, stain, tile, top, unit, vacuum, water, wipe, work, worktop
Posted in Kitchen Fitting | Comments Off
I’ve recently sanded down an old wooden table I’m rather fond of and finished it off with a high lustre polyurethane seal. I wish I could claim all the credit for the final effect – just don’t tell anybody I used ideas I gleaned from a retired London Painter living in the village not far from me.
• Work in the best light – That does not mean under blazing overhead light that shines back in your eyes.  What is does mean is natural illumination streaming softly through doors and windows at a low angle. This emphasises the grain that you must accommodate, and turns imperfections into shadows that you can easily see. If you don’t have natural light available, set a desk lamp at one end of the bench.
• Choose the right sandpaper – Sandpaper comes in different colours, although there are no industry rules. Some suppliers use colour to highlight different grit size. Others use it to indicate different types. Choose three strengths of paper designed for the job in hand, so you can work progressively from coarse to fine.
• Use sanding tools – The chances of achieving a level finish using bare hands are low, because fingers are creative things, not mechanised machines. Use a sanding block for a smaller piece of work,  and a power sander for a larger job. Bear in mind that power tools are more productive. Use finer grit paper to counteract the effect.
• Use a jig – Wrap sandpaper around a reverse shape to sand right into a tricky corner, and move your work gently up and down against it. Work carefully – the results can be quite dramatic.
• Check progress as you go along – Put a used nylon stocking over your hand and run it gently across the surface of your work to find rough spots. If you’re a guy though, perhaps you shouldn’t admit to wearing pantyhose in the workshop?
You won’t need to Find a Painter to do a hobbyist job like this. But you will need to get Painting Quotes on Mr-Skill for wooden doors and window frames. Trust me. I tried that. You don’t want to go down that road alone.
Tags: angle, bench, block, check, choose, coarse, colour, door, find a painter, fine, finish, grade, grain, grit, jig, lamp, level, light, london painter, natural, nylon, painting quote, paper, power, progress, reverse, rough, sand, sandpaper, seal, shadow, shine, size, smooth, soft, stocking, strength, table, tool, window, wood, work
Posted in Painting & Decorating | Comments Off
Posted in Tiling & Flooring on Oct 21
Funny, isn’t it, how fashions keep on going round and round. All that’s as true of building materials as it is of clothes. The difference is that your home is going to have to wear its finishes for far longer than you are going to hang on to your hat. For this reason it’s best to know what you are looking for before you get your Tiling Quotes.
 Did I mention that I went to school with a London Tiler? Well he wasn’t a tiler then, but he did become one good enough to successfully start his own flooring firm. This was the advice he gave when asked:
• Stick to natural materials wherever possible. This is because they are timeless and you can always find an acceptable replacement, even if a tile breaks after fifty years.
• Travertine is often beautifully marked and coloured having been paid down by rivers over centuries, and is soft and easy to work with. In the fancy shops it is also called onyx and alabaster.
• Limestone is another sedimentary rock primarily white or light coloured, but also tinted by small impurities. It is often used in commercial developments where the varying thicknesses are an architectural asset.
• Slate is traditionally used for flooring, although new techniques have seen it applied to walls too. It is extremely durable making it ideal for outside use. However quality is unpredictably varied.
•  Marble is valued for its mirror finish after polishing, and has been used for cladding buildings for thousands of years. It is probably the most expensive of all the options, and the most copied by ceramic tile manufacturers.
• Sandstone provides an attractive varied finish on feature walls, although good effect is often only achieved by hand-sorting tiles. It is brittle and unsuitable for floors.
Now that you have made a choice why not Find a Tiler on Mr-Skill right away? You will have range of choices when you shop through us. You may even expect savings of up to 30% on labour against normal rates thanks to our buying power.
Tags: brittle, Building, colour, durable, easy, effect, expensive, fashion, find a floor contractor, floor, light, limestone, london tiler, marble, mark, natural, outside, polish, replace, sandstone, sedement, slate, soft, thick, tile, tiling quotes, travertine, vary, wall, white, work
Posted in Tiling & Flooring | Comments Off
|
Subscribe to our RSS Feed